As there
are many ways to retrieve Wi-Fi password. This is one of them. Try it on your
own risk!!!!!
*** This
Software is for your own Wi-Fi education purpose.
Cracking other
people Wi-Fi is illegal and against law.
Advice: you do not attempt to attack other wireless
other than your own.
1. Insert
CD to you CD ROM(Or make pendrive bootable), restart your computer and boot the
CD Rom (just like when you format computer to install windows, boot the CD).
You may
need to change your boot order to CDROM first instead of Hard disk. It normally
change in bios setup during you start computer by press F2, F10, ESC depending
your computer.
2. After
boot successful, you will be bring to below screen. Click the Minipwep-gtk to
start the program.A windows will prompt out, just click ok.
3. When
below windows prompt out, just click ok.
4. Click
the Minipwep-gtk to start the program. Then click scan to scan the available
wireless.
5. Select
the wireless with client, and click the launch to start cracking process.
Note: the
router that you want to hack must be using (have data transfer), the higher
data transfer, the faster the cracking process.
If you
notice that IVS value is not running, or running very slow after few minutes,
it means that there is no data transfer on the router. You may look for other
time (when the router is using) to test again.
6. Below
showing the IVS is running and increasing... Normally IVS Reach value around
30000 to 50000, the password will be found.
7. Below
shown successful case with password shown. Copy down the password and close the
software. Then logout and shutdown the machine.
For
WPA/WPA2:
1. Just
select WPA/WPA2 and click scan.
2. Select
the Wi-Fi that have client and click the dictionary attack to browse to your
dictionary password list.
3. Click launch
to attack. If password still not found after the run out the dictionary list,
you have to prepare a bigger dictionary list.
You can download dictionary files from
here:
Comments
Post a Comment